We will participate in the upcoming World Of Concrete, January 24 – 27, 2012 in the Las Vegas Convention Center. Booth S10501 in the South Hall is where you’ll find us. Read more
2011-08-23 Added film clip
Short film showing tunnel work with Robot 36x. The Robot is equipped with a specially designed feed beam for the radius of the tunnel wall. Read more
2011-07-15 Added -clips
A few YouTube-clips has been added to the “Case Film Press”-section. Read more
2011-06-27 Conjet cleans up at Glenlee power station
The refurbishment of a giant penstock at the Glenlee hydro power station required specialist technology from Sweden. Lars-Göran Nilsson, executive vice president of Conjet tells the story.. Read more
2011-06-21 Wireless communication with your powerpack
Conjet AB is proud to introduce our latest addition to our wide range of accessories to your existing unit. A wireless communication between the high pressure pump and the Conjet Robot. Read more
2011-05-05 Website finally updated
Conjet AB are pleased to present the updated website.
2011-04-14 Mechanise your handlance
Utilize the full potential of your handlance pump by attaching it to our latest product, Jetframe 101 – NALTA.Read more
Hydrodemolition technology removes concrete using water pressure above 1000 bar, for long lasting, high quality repairs.
It creates no micro-cracks, a good surface to bond to and leaves jack-hammers to the history.
Click the arrow to start the hydrodemolition animation
Selective removal
Removal of concrete down to a pre-set quality level. I.e. no unnecessary removal of good quality concrete.
No microcracks
The technology does not create micro-cracks in the remaining surface, unlike percussive methods. A micro-crack is a non-bonding zone.
Rough surface – bonding
The rough surface provides a far better bond for the new concrete, compared to removal by percussive methods.
Your project – utilize Conjet’s know-how
Conjet was established about 30 years ago, but our knowledge doesn’t stop at hydrodemolition, as the staff have a background from other demanding businesses. That means that we have seen and been involved in almost all kinds of hydrodemolition projects imaginable. Chances are that we have been involved in a project similar to yours and have some experience that we will share with you. Click here, fill out the form and we will get back to you.
Hydrodemolition equipment for your project
The typical Conjet hydrodemolition system consists of:
- Conjet Robot that removes the concrete by means of high pressure water, fed through a high pressure hose, from a high pressure pump
- Conjet Powerpack contains a high pressure pump supplying pressurized water to the robot.
One-push starts your project
Set-up your Conjet equipment on site, feed water to the pump, connect the high pressure hose and communication between the high pressure pump and the Robot. (See the animation).
Select mode
Connect the power and push one button and within 10 seconds the Robot is ready.
Please try the translation feature found at the bottom of the page.
Conjet AB is proud to introduce our latest addition to our wide range of accessories to your existing unit.
Utilize the full potential of your handlance pump by attaching it to our latest product, Jetframe 101 – NALTA.
Selective removal
